Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pilot Valve Type | N/A |
| Overrides | No Overrides |
| Crossover | All Ports Blocked |
| NFPA Size | D05 |
| Spool Code | 2 |
| Flow Direction Code | 4 |
| Solenoid Air Gap Code | None |
| Design No. | 50 |
| AC/DC | AC |
| Pressure Port Check Valve Pressure | N/A |
| Response Type | Standard Response |
| Cycle Rate [Max] | N/A |
| Function | 3-Position Spring Centered |
| Actuator Type | Solenoid |
| Electrical Connection | Ground Terminal |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Valve Type | Standard-Duty |
| Rated Flow [Max] | 20 gal/min |
| Seal Material | Buna-N |
| Pressure [Max] | 3000 psi |
| Coil Type | No Coil |
| Pilot/Drain | None |
| Solenoid | Double |
| Mechanical Options | None |
| Operation | Solenoid Operated |
| Reducer Module | N/A |
| Electrical Options Code | None |
| Mechanical Options Code | None |
| Center Position | All Ports Blocked |
| Spool Spring Arrangement Code | C |
| Surge Suppressor/Damper | None |
| Indicator Lights | No |
| Coil Rating Code | None |
| Port T Pressure Rating | 1000 psi |
| Port Restrictor Plugs | None |
| Electrical Options | None |
| Weight | 10.0 LB |
