Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Function | 3-Position Spring Centered |
| Overrides | No Overrides |
| Pressure Port Check Valve Pressure | N/A |
| Pilot Valve Type | N/A |
| No. of Stages | Single Stage |
| Temperature Range [Min] | 68 °F |
| Electrical Connection | Ground Terminal |
| Mechanical Options Code | None |
| Pilot/Drain | None |
| Body Material | Gray Iron |
| Response Type | Standard Response |
| Port T Pressure Rating | 1000 psi |
| Crossover | P Blocked, A or B to T |
| Compatible Fluids | Petroleum Oil |
| Tank Port Rating | 1000 |
| Pressure [Max] | 11000 psi |
| Temperature Range [Max] | 122 °F |
| Center Position | P Blocked, A & B to T |
| Valve Type | Standard-Duty |
| Model No. | DG4S4-0133C-50 |
| Operation | Solenoid Operated |
| Seal Material | Buna-N |
| Performance | Standard Performance |
| Manual Override | Plain Override |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Leakage | Standard Performance |
| Electrical Options | None |
| Cycle Rate [Max] | N/A |
| Spool Spring Arrangement Code | C |
| AC/DC | AC |
| Spool Code | 33 |
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| Coil Rating Code | None |
| Coil Type | No Coil |
| Reducer Module | N/A |
| Actuator Type | Solenoid |
| Mounting | Subplate/Manifold Mount |
| Actuation Identification | Solenoid A, Solenoid B |
| Electrical Options Code | None |
| Fluid Cleanliness | 19/17/14 micron |
| Mechanical Options | None |
| Rated Flow [Max] | 24 gal/min |
| Solenoid Air Gap Code | None |
| NFPA Size | D05 |
| Design No. | 50 |
| Solenoid | Double |
| Port Restrictor Plugs | None |
| Flow Direction Code | 4 |
| Weight | 5.75 LB |
