Find a Service Center
- PVM045 Series Industrial Axial Piston Pump
- CW Rotation
- 1 in Keyed Shaft
- SAE B, 2 Bolt w/4 in Pilot
- 20 gal/min @ 1800 rpm
description
- Open circuit, axial piston designs that feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size that allows installation in tighter locations. Capable of operating with many types of hydraulic fluids used in industrial and mobile systems. High water content and phosphate ester fluids can be accommodated, in addition to the typical petroleum-based and synthetic fluids.
applications
- Metal shears
- Material conveyors
- Blow molding machines
- Metal die casters
- Entertainment rides
- Tube forming and bending
- Automotive transfer lines
- Process industry machines
- Flight simulators
features
- Compact design
- Inlet and outlet gauge ports and adjustable maximum displacement stops
- Low 4% pressure ripple
- Long pump life
- Quiet pump operation
- Reduced maintenance
- Design promotes leak-free system
| Spline Description | N/A |
| Shaft Type | Straight Keyed |
| Mounting Flange | SAE B, 2 Bolt |
| Paint | Standard Blue Paint |
| Control Type | Pressure & Flow Compensator w/Bleed Orifice |
| Manufacturer Part No. | PVM045ER06CS02AAB21110000A0A |
| Shaft Length | 1 1/2 in |
| Operating Pressure [Max] | 5000 psi |
| Origin | Axial Piston Pumps |
| Outlet Port | 1 in 4-Bolt Flange/Code 61 |
| Key | 1/4 in |
| Displacement (in³/rev) | 2.75 |
| Series | PVM045 |
| Flow @ RPM | 11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm |
| Shaft Description | SAE B-B |
| Special Features | Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Model No. | PVM045ER06CS02AAB21110000A0A |
| Pressure Compensator Setting | 210 Bar |
| Port Type | Flange Ports |
| HP @ 1,800 rpm [Max] | 55 hp |
| Shaft Dia. | 1 in |
| Auxiliary Mounting Pad | Single Pump, Non-Thru-Drive |
| Flow Compensator Setting | 11 Bar |
| Pilot Diameter | 4 in |
| Inlet Port | 2 in 4-Bolt Flange/Code 61 |
| Seal Material | Buna-N |
| RPM [Max] | 1800 rpm |
| Port Location | Side Port |
| Valve Plate | Electric Motor Speeds |
| GPM @ Speed | 20 gpm @ 1800 rpm |
| Rotation | Right Hand (CW) |
| Bolt Circle Dia. | 5 3/4 in |
| Pump Type | Open Circuit Axial |
| Weight | 52.0 LB |
