02-354634

DG4V-3 Series High-Performance Solenoid Operated Directional Valve

Item #101951114

Wired Term Block

1/2 NPT Conduit Box & Housing

Center Pos: P Blocked, A & B to T

Crossover: P Blocked, A or B to T

w/Lights

21.00 gpm Max Flow

+ Show More

Auto Replenish

each One-time purchase

Product Details

These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.

Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards

Specifications

Spool Shift Timing	N/A
Spool Spring Arrangement Code	B
Rated Flow [Max]	21 gal/min
Pressure Port Check Valve Pressure	N/A
Pressure [Max]	5075 psi
Operation	Solenoid Operated
Function Code	6
Spool Indicator Switch Code	None
Electrical Options	None
Electrical Connection	Wired Terminal Block
Coil Rating Code	B
Reducer Module	N/A
Seal Material	Buna-N
Port T Code	6
Cycle Rate [Max]	N/A
Surge Suppressor/Damper Code	None
Pilot/Drain	None
Design No.	60
Solenoid Code	B
Port T Pressure Rating	3000 psi
Port Restrictor Plug Code	None
Valve Type	High-Performance
Crossover	P Blocked, A or B to T
Function	2-Position Spring Offset, End to Center
AC/DC	AC
Overrides	No Overrides
NFPA Size	D03
EN Code	None
Pilot Valve Type	N/A
Actuator Type	Solenoid
Coil Type Code	F
Port Restrictor Plugs	None
Mechanical Options	None
Housing Code	W
Surge Suppressor/Damper	None
Coil Type	Flying Leads, 1/2 NPT Thread Wiring Housing
Response Type	Standard Response
Manual Override Option Code	H
Solenoid	Single
Center Position	P Blocked, A & B to T
Voltage & Frequency	110/120 VAC – 50/60 Hz
Indicator Lights	Yes
Spool Code	6
Solenoid Indicator Lights Code	L
Solenoid Energization Code	None
Electrical Connector Code	T
Weight	5.0 LB