Find a Service Center
- PVM018 Series Industrial Axial Piston Pump
- CW Rotation
- 5/8 in Keyed Shaft
- SAE A, 2 Bolt w/3 1/4 in Pilot
- 8.2 gal/min @ 1800 rpm
description
- Open circuit, axial piston designs that feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size that allows installation in tighter locations. Capable of operating with many types of hydraulic fluids used in industrial and mobile systems. High water content and phosphate ester fluids can be accommodated, in addition to the typical petroleum-based and synthetic fluids.
applications
- Metal shears
- Material conveyors
- Automotive transfer lines
- Process industry machines
- Flight simulators
- Entertainment rides
- Tube forming and bending
- Blow molding machines
- Metal die casters
features
- Compact design
- Inlet and outlet gauge ports and adjustable maximum displacement stops
- Low 4% pressure ripple
- Long pump life
- Quiet pump operation
- Reduced maintenance
- Design promotes leak-free system
| Series | PVM018 |
| Seal Material | Buna-N |
| Outlet Port | G3/4 |
| Shaft Length | 0.94 in |
| HP @ 1,800 rpm [Max] | 22 hp |
| Bolt Circle Dia. | 4 3/16 in |
| Operating Pressure [Max] | 5000 psi |
| Key | 5/32 in |
| Rotation | Right Hand (CW) |
| Displacement (in³/rev) | 1.1 |
| Paint | Standard Blue Paint |
| Port Type | BSPP Tube Ports |
| Origin | Axial Piston Pumps |
| Port Location | Side Port |
| Valve Plate | Electric Motor Speeds |
| Flow Compensator Setting | 11 Bar |
| Shaft Type | Straight Keyed |
| Manufacturer Part No. | PVM018ER01AS05AAB28110000A0A |
| Special Features | Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Model No. | PVM018ER01AS05AAB28110000A0A |
| Auxiliary Mounting Pad | Single Pump, Non-Thru-Drive |
| Pump Type | Open Circuit Axial |
| Inlet Port | G1 1/4 |
| Pilot Diameter | 3.25 in |
| GPM @ Speed | 8.2 gpm @ 1750 rpm |
| Shaft Dia. | 0.625 in |
| Mounting Flange | SAE A, 2 Bolt |
| Flow @ RPM | 4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm |
| Shaft Description | SAE A |
| Spline Description | N/A |
| RPM [Max] | 1800 rpm |
| Pressure Compensator Setting | 280 Bar |
| Control Type | Pressure & Flow Compensator w/Bleed Orifice |
| Weight | 33.0 LB |
