Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Compatible Fluids | Petroleum Oil |
| EN Code | None |
| NFPA Size | D08 |
| Actuator Type | Solenoid |
| Performance | Standard Performance |
| Spool Spring Arrangement Code | C |
| Valve Type | Standard-Duty |
| Crossover | P Blocked, A or B to T |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Port Restrictor Plug Code | None |
| Spool Code | 6 |
| Mechanical Options Code | None |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Function | 3-Position Spring Centered |
| Tank Port Rating | 5000 |
| Actuation Identification | Solenoid A, Solenoid B |
| Electrical Options Code | None |
| Overrides | Plain Override Solenoid Ends |
| Fluid Cleanliness | 19/17/14 micron |
| Indicator Lights | Yes |
| Pressure [Max] | 5000 psi |
| Port Restrictor Plugs | None |
| Solenoid Energization Code | None |
| Temperature Range [Min] | -40 °F |
| Pilot Pressure Code | None |
| Response Type | Standard Response |
| Coil Rating Code | B |
| Mechanical Options | Adjust Pilot Chokes on Both Ends |
| Electrical Connection | Five Pin Connector |
| Seal Material | Buna-N |
| Pilot Valve Type Code | S |
| Electrical Options | None |
| Gauge Port | SAE-4 |
| Reducer Module | No |
| No. of Stages | Two Stage |
| Spool Indicator Switch Code | None |
| Leakage | Standard Performance |
| Surge Suppressor/Damper | None |
| Temperature Range [Max] | 230 °F |
| Port T Pressure Rating | 5000 psi |
| Model No. | DG5V-8-S-6C-2-T-M-FPA5WL-B-10 |
| Pressure Port Check Valve Code | None |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Surge Suppressor/Damper Code | None |
| Operation | Pilot Operated |
| Body Material | Ductile Iron |
| Housing Code | W |
| Center Position | P Blocked, A & B to T |
| Rated Flow [Max] | 175 gal/min |
| Solenoid Indicator Lights Code | L |
| Coil Type Code | F |
| Manual Override Option Code | None |
| Mounting | Subplate/Manifold Mount |
| Gauge Ports Code | None |
| Pilot Drain Code | T |
| Pilot/Drain | Internal Pilot/Internal Drain |
| Pilot Valve Type | CETOP 3, Standard Performance |
| AC/DC | AC |
| Solenoid | Double |
| Response Type Code | None |
| Spool Control Modification Code | 2 |
| Reducer Module Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Design No. | 10 |
| Manual Override | Plain Override |
| Electrical Connector Code | PA5 |
| Weight | 35.0 LB |
