These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Operation
Solenoid Operated
Valve Type
High-Performance
Electrical Options
None
Coil Type Code
U6
Surge Suppressor/Damper Code
None
Function
3-Position Detented
Indicator Lights
No
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Pilot/Drain
None
Port Restrictor Plugs
None
Solenoid
Double
Overrides
No Overrides
Manual Override Option Code
None
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Electrical Connector Code
None
Surge Suppressor/Damper
None
Design No.
60
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Spool Indicator Switch Code
None
Electrical Connection
Connector Fitted w/ Lights
Pressure Port Check Valve Pressure
N/A
Housing Code
None
Coil Type
Connector Fitted w/Lights
Solenoid Energization Code
None
AC/DC
DC
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Port T Code
7
NFPA Size
D03
Mechanical Options
None
EN Code
None
Spool Shift Timing
N/A
Voltage & Frequency
24 VDC
Function Code
2
Coil Rating Code
H
Center Position
All Ports Blocked
Solenoid Code
H
Spool Spring Arrangement Code
N
Crossover
All Ports Blocked
Response Type
Standard Response
Spool Code
2
Reducer Module
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
