These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure [Max]
5075 psi
Electrical Connection
Wired Terminal Block
Pilot/Drain
None
Response Type
Standard Response
Coil Type Code
F
Electrical Options
None
Port T Code
7
NFPA Size
D03
Mechanical Options
None
Housing Code
W
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Function
3-Position Spring Centered
EN Code
None
Port Restrictor Plugs
None
Center Position
All Ports Blocked
Indicator Lights
Yes
Reducer Module
N/A
Pilot Valve Type
N/A
Solenoid
Double
Crossover
All Ports Blocked
Surge Suppressor/Damper
Encapsulated Transzorb
Coil Rating Code
HL
Solenoid Energization Code
None
Solenoid Code
HL
Pressure Port Check Valve Pressure
N/A
Operation
Solenoid Operated
Function Code
2
AC/DC
DC
Spool Code
2
Overrides
No Overrides
Port Restrictor Plug Code
None
Valve Type
High-Performance
Design No.
60
Surge Suppressor/Damper Code
D7
Voltage & Frequency
24 VDC, Low Power Coil
Electrical Connector Code
T
Spool Indicator Switch Code
None
Solenoid Indicator Lights Code
L
Spool Spring Arrangement Code
C
Manual Override Option Code
None
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back