02-324777

Vickers D05 Solenoid Valve

Item #101978019

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Actuator Type	Solenoid
Voltage & Frequency	110/120 VAC - 50/60 Hz
Port Restrictor Plugs	None
Center Position	P Blocked, A & B to T
Spool Code	6
Pilot Valve Type	N/A
Electrical Options Code	LW
Seal Material	Buna-N
Coil Rating Code	B
Tank Port Rating	1000
Overrides	No Overrides
Electrical Connection	Lead Wires w/ Terminal Box
Design No.	60
Spool Spring Arrangement Code	B
Model No.	DG4S4LW-016B-B-60-LH
Electrical Options	None
Cycle Rate [Max]	N/A
Function	2-Position Spring Centered
Rated Flow [Max]	25 gal/min
Pressure Port Check Valve Pressure	N/A
Pressure [Max]	3600 psi
Mechanical Options Code	LH
NFPA Size	D05
Valve Type	Standard-Duty
Port T Pressure Rating	1000 psi
Coil Type	Flying Leads
AC/DC	AC
Indicator Lights	Yes
Pilot/Drain	None
Coil Type Code	None
Crossover	P Blocked, A or B to T
Mechanical Options	Single Solenoid Reverse Assembly
Solenoid	Single
Reducer Module	N/A
Operation	Solenoid Operated
Flow Direction Code	4
Surge Suppressor/Damper	None
Response Type	Standard Response
Weight	10.0 LB