Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port T Pressure Rating | 1000 psi |
| Coil Type Code | None |
| Mechanical Options | None |
| Coil Type | Flying Leads |
| Body Material | Gray Iron |
| Pilot Valve Type | N/A |
| Electrical Options Code | W |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Temperature Range [Min] | 68 °F |
| Crossover | All Ports Blocked, or P & B Blocked, A to T |
| Pressure Port Check Valve Pressure | N/A |
| Surge Suppressor/Damper | None |
| Solenoid | Double |
| Valve Type | Standard-Duty |
| Performance | Standard Performance |
| Operation | Solenoid Operated |
| Actuation Identification | Solenoid A, Solenoid B |
| Spool Code | 3 |
| NFPA Size | D05 |
| Temperature Range [Max] | 122 °F |
| Port Restrictor Plugs | None |
| Manual Override | Plain Override |
| AC/DC | DC |
| Flow Direction Code | 4 |
| Pressure [Max] | 8500 psi |
| Electrical Options | None |
| Actuator Type | Solenoid |
| Overrides | No Overrides |
| Response Type | Standard Response |
| Tank Port Rating | 1000 |
| Design No. | 60 |
| Model No. | DG4S4W-013C-X-60 |
| Coil Rating Code | X |
| Seal Material | Buna-N |
| Cycle Rate [Max] | N/A |
| Fluid Cleanliness | 19/17/14 micron |
| No. of Stages | Single Stage |
| Spool Spring Arrangement Code | C |
| Pilot/Drain | None |
| Rated Flow [Max] | 24 gal/min |
| Mounting | Subplate/Manifold Mount |
| Voltage & Frequency | 250 VDC |
| Mechanical Options Code | None |
| Indicator Lights | Yes |
| Leakage | Standard Performance |
| Reducer Module | N/A |
| Compatible Fluids | Petroleum Oil |
| Function | 3-Position Spring Centered |
| Center Position | P & B Blocked, A to T |
| Weight | 10.0 LB |
