These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
Yes
EN Code
None
Port T Code
6
Cycle Rate [Max]
N/A
Overrides
No Overrides
Electrical Connector Code
PA5
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper Code
None
Coil Type Code
F
Center Position
P Blocked, A & B to T
Solenoid Indicator Lights Code
L
Pressure [Max]
5075 psi
Housing Code
W
Port T Pressure Rating
3000 psi
Solenoid
Double
Seal Material
Buna-N
Spool Indicator Switch Code
None
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Manual Override Option Code
None
Operation
Solenoid Operated
AC/DC
AC
NFPA Size
D03
Reducer Module
N/A
Coil Rating Code
B
Pilot Valve Type
N/A
Spool Spring Arrangement Code
C
Port Restrictor Plugs
None
Function Code
66
Spool Code
66
Electrical Connection
Five Pin Connector
Surge Suppressor/Damper
None
Pilot/Drain
None
Crossover
P Blocked, A or B to T
Solenoid Code
B
Mechanical Options
None
Actuator Type
Solenoid
Design No.
60
Valve Type
High-Performance
Electrical Options
None
Rated Flow [Max]
21 gal/min
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Function
3-Position Spring Centered
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back