These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Code
BL
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Port T Code
6
Spool Spring Arrangement Code
C
Pressure Port Check Valve Pressure
N/A
Function Code
2
AC/DC
AC
Mechanical Options
None
Cycle Rate [Max]
N/A
Spool Code
2
Electrical Connection
Wired Terminal Block
Pressure [Max]
5075 psi
EN Code
None
Electrical Connector Code
T
NFPA Size
D03
Coil Type Code
F
Surge Suppressor/Damper Code
None
Indicator Lights
No
Response Type
Standard Response
Spool Indicator Switch Code
None
Reducer Module
N/A
Solenoid
Double
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Overrides
No Overrides
Valve Type
High-Performance
Manual Override Option Code
None
Solenoid Indicator Lights Code
None
Center Position
All Ports Blocked
Port Restrictor Plugs
None
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Coil Rating Code
BL
Pilot/Drain
None
Housing Code
W
Design No.
60
Actuator Type
Solenoid
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Energization Code
None
Seal Material
Buna-N
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Crossover
All Ports Blocked
Electrical Options
None
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back