02-304569

Vickers D05 Solenoid Valve

Item #102087468

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Pilot Valve Type	N/A
Response Type	Standard Response
Electrical Connection	DIN 43650
Rated Flow [Max]	25 gal/min
Design No.	60
Electrical Options Code	None
Solenoid	Single
Operation	Solenoid Operated
Coil Rating Code	D
Reducer Module	N/A
Seal Material	Buna-N
Valve Type	Standard-Duty
NFPA Size	D05
Surge Suppressor/Damper	None
Pressure [Max]	3600 psi
Spool Code	2
Crossover	All Ports Blocked
Flow Direction Code	4
Indicator Lights	No
Spool Spring Arrangement Code	B
Tank Port Rating	1000
Mechanical Options	None
Mechanical Options Code	None
Model No.	DG4S4-012B-U-D-60
Port T Pressure Rating	1000 psi
Pilot/Drain	None
Actuator Type	Solenoid
Voltage & Frequency	220 VAC - 50 Hz
Cycle Rate [Max]	N/A
Coil Type Code	U
Electrical Options	None
Overrides	No Overrides
Function	2-Position Spring Centered, End to Center, Single End
Port Restrictor Plugs	None
AC/DC	AC
Pressure Port Check Valve Pressure	N/A
Coil Type	ISO 4400 (Din 43650) Connector
Center Position	All Ports Blocked
Weight	10.0 LB