These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
P to T, A & B Blocked
Cycle Rate [Max]
N/A
Pilot/Drain
None
Valve Type
High-Performance
Response Type
Standard Response
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Port T Code
6
Port Restrictor Plugs
None
Manual Override Option Code
None
Electrical Options
None
Solenoid
Double
NFPA Size
D03
Pressure [Max]
5075 psi
Seal Material
Buna-N
Design No.
61
Voltage & Frequency
220/240 VAC – 50/60 Hz
Spool Code
8
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Operation
Solenoid Operated
Mechanical Options
None
Overrides
No Overrides
Function Code
8
Spool Spring Arrangement Code
C
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
AC/DC
AC
Crossover
All Ports Open, Restricted
Coil Rating Code
D
Solenoid Energization Code
V
Surge Suppressor/Damper
None
Solenoid Code
D
Function
3-Position Spring Centered
Electrical Connection
No Connector
Reducer Module
N/A
Electrical Connector Code
None
Housing Code
W
Coil Type Code
F
Indicator Lights
No
Port T Pressure Rating
3000 psi
EN Code
None
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back