Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Model No. | RV1-10-I-0-18/14.5 |
| Pilot Ratio | 100:1 |
| Adjustment Type | Internal |
| Leakage | 0.25 cc/min |
| Valve Torque into Cavity | 47 to 54 Nm |
| Housing Material | Cartridge Only |
| No. of Housing Ports | 2 |
| Type | Pressure Relief Valve |
| Pressure Setting | 1023 psi |
| Seal Kit Viton | 566086 |
| Port Size | Cartridge Only |
| Recommend Filtration Level | 18/16/13 microns |
| Seal Kit Buna | 565803 |
| Temperature Range [Min] | -40 °F |
| Cracking Pressure [Min] | 250 psi |
| Series | RV1-10 |
| Operation | Direct Acting |
| Temperature Range [Max] | 248 °F |
| No. of Valve Ports | 2 |
| Body Type | 1 |
| Installation | Screw-in Cartridge |
| Operating Pressure [Min] | 247 psi |
| Pressure [Max] | 3046 psi |
| Cavity | C-10-2 |
| Cracking Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Operating Pressure [Max] | 3046 psi |
| Port Type | Cartridge Only |
| Valve Material | Cartridge only |
| Flow [Max] | 8 gal/min |
| Manufacturer Part No. | RV1-10-I-0-18/14.5 |
| Style | Poppet |
| Weight | 0.48 LB |
