Find a Service Center
- Pressure Control Valve
- Pressure Sequence Valve Type
- PSV10-10 Series
- Cartridge Only Port Size
- Direct Acting, Normally Closed Operation
caution
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Series | PSV10-10 |
| Manufacturer Part No. | PSV10-10V-I-0-12/ |
| Operation | Direct Acting, Normally Closed |
| Cavity | C-10-4 |
| Type | Pressure Sequence Valve |
| Adjustment Type | Internal |
| Pressure Setting | 700 psi |
| Port Size | Cartridge Only |
| Housing Material | Cartridge Only |
| Seal Kit Buna | 889625 |
| Flow [Max] | 6 gal/min |
| Pilot/Drain | External Pilot/External Drain |
| Pressure [Max] | 3000 psi |
| Seal Kit Viton | 566080 |
| Model No. | PSV10-10V-I-0-12/ |
| Sequence Pressure [Max] | 1200 psi |
| Sequence Pressure [Min] | 200 psi |
| Seal Material | Viton |
| Weight | 0.6 LB |
