Find a Service Center
- Solenoid Valve
- 2-Way, Normally Closed Spool Valve Type
- SAE Port Type
- Direct Acting Actuation
- Spool
description
- Two-way, two-position, direct-acting, spool-type, normally-closed, screw-in cartridge solenoid valve. In the de-energized position, flow is blocked in both directions. In the energized position, the spool lifts to allow flow in either direction.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Cartridge Valve Series | SV4-10-C |
| Series | J Series |
| Filter Option | None |
| Pressure [Max] | 3000 psi |
| Valve Torque into Cavity | 45 to 54 Nm |
| Bi-Directional (2-Way Valves) | No |
| Actuation | Direct Acting |
| Seal Material | Viton |
| Size Designation | 10 |
| Port Size | SAE-8 |
| Manual Override | No Manual Override |
| Valve Voltage Rating | 24 VDC |
| Coil Series | Use J Series, 23 W |
| Seal Kit Viton | 889627 |
| Temperature Range [Max] | 248 °F |
| No. of Valve Ports | 2 |
| No. of Housing Ports | 2 |
| Housing No. | 876701 |
| Installation | Screw-in Cartridge |
| Valve Type | 2-Way, Normally Closed Spool |
| Housing Material | Aluminum |
| Model No. | SV4-10V-C-8H-24DG |
| Port Type | SAE |
| Watt Rating | 23 W |
| Operation | Solenoid Operated |
| Recommend Filtration Level | 18/16/13 microns |
| Seal Kit Buna | 565806 |
| Flow [Max] | 6 gal/min |
| Cavity | C-10-2 |
| Temperature Range [Min] | -40 °F |
| Connector Type | DIN 43650-A |
| Poppet/Spool | Spool |
| Weight | 0.0 LB |
