Find a Service Center
- SV1-10-3 Series 3-Way, 2-Position Direct Acting Solendoid Cartridge Valve
- Spool Type
- 6 gal/min
- C-10-3 Cavity
- Aluminum Housing
description
- Three-way, two-position, direct-acting, spool-type screw-in cartridge solenoid valve. In the de-energized position, this valve allows flow from port 2 to port 1 while port 3 is blocked. In the energized position, flow is allowed from port 1 to port 3 while port 2 is blocked.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Valve Voltage Rating | 24 VDC |
| Actuation | Direct Acting |
| Connector Type | Conduit |
| Size Designation | 10 |
| Port Type | SAE |
| Seal Kit Viton | 889688 |
| Seal Material | Buna-N |
| Manual Override | No Manual Override |
| Poppet/Spool | Spool |
| Cartridge Valve Series | SV1-10-3 |
| Temperature Range [Max] | 248 °F |
| Bi-Directional (2-Way Valves) | No |
| Seal Kit Buna | 889624 |
| Filter Option | None |
| Cavity | C-10-3 |
| Operation | Solenoid Operated |
| Series | SV1-10-3 |
| Port Size | SAE-6 |
| Valve Type | 3-Way, Spool |
| Coil Series | Use J Series, 23 W |
| Flow [Max] | 6 gal/min |
| Housing No. | 566162 |
| Housing Material | Aluminum |
| Pressure [Max] | 3000 psi |
| Temperature Range [Min] | -40 °F |
| Weight | 0.0 LB |
