Find a Service Center
- Solenoid Valve
- 4-Way, 2-Position Valve Type
- Direct Acting Actuation
- Spool
description
- Four-way, two-position, direct-acting, spool-type, screw-in cartridge solenoid valve. In the de-energized position, flow is allowed between port 1 and port 4 while port 2 and port 3 are blocked. In the energized position port 3 is open to port 4 and port 2 is open to port 1.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Cartridge Valve Series | SV4-10-4 |
| Temperature Range [Min] | -40 °F |
| Operation | Solenoid Operated |
| Valve Type | 4-Way, 2-Position |
| Size Designation | 10 |
| Model No. | SV4-10-4-0-12DQ |
| Connector Type | Spade |
| Valve Voltage Rating | 12 VDC |
| Watt Rating | 23 W |
| Seal Kit Buna | 889625 |
| Housing No. | N/A |
| Housing Material | Aluminum |
| Seal Material | Buna-N |
| Bi-Directional (2-Way Valves) | No |
| Cavity | C-10-4 |
| Series | J Series |
| Manual Override | No Manual Override |
| Filter Option | None |
| Pressure [Max] | 3000 psi |
| Poppet/Spool | Spool |
| Temperature Range [Max] | 248 °F |
| Seal Kit Viton | 566080 |
| Actuation | Direct Acting |
| Flow [Max] | 6 gal/min |
| Coil Series | Use J Series, 23 W |
| Weight | 0.0 LB |
