Find a Service Center
- RV2-10 Series Relief Valve
- Pilot Operated
- C-10-2 Cavity
- Viton Seals
- Knob Adjustment
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Flow [Max] | 30 gal/min |
| Port Size | SAE-8 |
| Cracking Pressure [Max] | 5000 psi |
| Manufacturer Part No. | RV2-10V-K-8T-50/ |
| Body Type | 1 |
| Seal Material | Viton |
| Cracking Pressure [Min] | 500 psi |
| Pressure [Max] | 5000 psi |
| Model No. | RV2-10V-K-8T-50/ |
| Pressure Setting | 2750 psi |
| Adjustment Type | Knob |
| Cavity | C-10-2 |
| Housing Material | Aluminum |
| Seal Kit Buna | 565803 |
| Operation | Pilot Operated |
| Seal Kit Viton | 566086 |
| Type | Relief Valve |
| Series | RV2-10 |
| Port Type | SAE |
| Weight | 0.48 LB |
