Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV3-10 Series
- Cartridge Only Port Size
- Direct Acting Operation
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Cavity | C-10-2 |
| Housing Material | Cartridge Only |
| Pressure Setting | 1500 psi |
| Port Size | Cartridge Only |
| Manufacturer Part No. | RV3-10-C-0-36/15 |
| Type | Pressure Relief Valve |
| Series | RV3-10 |
| Adjustment Type | Cap |
| Flow [Max] | 20 gal/min |
| Model No. | RV3-10-C-0-36/15 |
| Cage Seals | Single Backup Ring |
| Cracking Pressure [Min] | 600 psi |
| Seal Kit Buna | 565803 |
| Body Type | 10 |
| Seal Kit Viton | 566086 |
| Pressure [Max] | 3600 psi |
| Cracking Pressure [Max] | 3600 psi |
| Seal Material | Buna-N |
| Operation | Direct Acting |
| Weight | 0.48 LB |
