These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
EN Code
None
Crossover
All Ports Blocked
Cycle Rate [Max]
N/A
Center Position
All Ports Blocked
Surge Suppressor/Damper
None
Response Type
Standard Response
NFPA Size
D03
Voltage & Frequency
12 VDC
Mechanical Options
None
Coil Type Code
SP2
Solenoid Energization Code
None
Electrical Options
None
Design No.
60
Spool Code
2
Solenoid
Double
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Port Restrictor Plugs
None
Spool Spring Arrangement Code
C
Electrical Connection
No Connector
Pilot/Drain
None
Port T Code
7
Surge Suppressor/Damper Code
None
Manual Override Option Code
None
Coil Type
Dual 6.3 mm Spade
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Function Code
2
Housing Code
None
Spool Indicator Switch Code
None
Reducer Module
N/A
AC/DC
DC
Valve Type
High-Performance
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Function
3-Position Spring Centered
Indicator Lights
No
Coil Rating Code
G
Overrides
No Overrides
Pilot Valve Type
N/A
Solenoid Code
G
Operation
Solenoid Operated
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
