02-149288

Vickers D05 Solenoid Valve

Item #102043522

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Coil Type	Flying Leads
Pressure Port Check Valve Pressure	N/A
Actuator Type	Solenoid
Indicator Lights	No
Mechanical Options	None
Crossover	All Ports Open
Coil Rating Code	D
Coil Type Code	None
Reducer Module	N/A
Center Position	P to A & T, B Blocked
Model No.	DG4S4-011C-D-60
Pilot/Drain	None
Overrides	No Overrides
Seal Material	Buna-N
Solenoid	Double
Spool Code	1
Function	3-Position Spring Centered, Double End
Pilot Valve Type	N/A
Cycle Rate [Max]	N/A
Rated Flow [Max]	25 gal/min
Surge Suppressor/Damper	None
Electrical Options	None
Spool Spring Arrangement Code	C
Valve Type	Standard-Duty
Mechanical Options Code	None
AC/DC	AC
Operation	Solenoid Operated
Response Type	Standard Response
Design No.	60
Flow Direction Code	4
Voltage & Frequency	220 VAC - 50 Hz
Electrical Options Code	None
Electrical Connection	KU W/ Deutsch Connector
Port Restrictor Plugs	None
Tank Port Rating	1000
Port T Pressure Rating	1000 psi
NFPA Size	D05
Pressure [Max]	3600 psi
Weight	10.0 LB