Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Ideal for use with filters and lubricators
- Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
- Some chemicals can cause damage
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| No. of Stages | Single Stage |
| Seal Material | Buna-N |
| Pilot Valve Type | N/A |
| Coil Type Code | U |
| Rated Flow | 16 gal/min |
| Surge Suppressor/Damper | None |
| Spool Shift Timing | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options | None |
| Solenoid | Double |
| Electrical Connection | DIN 43650 |
| Overrides | No Overrides |
| Manual Override | Plain Override |
| Function | 3-Position Spring Centered, Double End |
| Mounting | Subplate/Manifold Mount |
| Actuator Type | Solenoid |
| Pilot/Drain | None |
| Temperature Range [Max] | 122 °F |
| Tank Port Rating | 1000 |
| Valve Type | Standard-Duty |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Solenoid Code | G |
| Body Material | Gray Iron |
| Voltage & Frequency | 12 VDC |
| Coil Rating Code | G |
| Compatible Fluids | Petroleum Oil |
| Flow Direction Code | 4 |
| Mechanical Options | None |
| NFPA Size | D05 |
| Pressure [Max] | 7000 psi |
| Top Electrical Box | No |
| Temperature Range [Min] | 68 °F |
| Model No. | DG4S4-010C-U-G-60 |
| Leakage | Standard Performance |
| Center Position | All Ports Open |
| Cycle Rate [Max] | N/A |
| Mechanical Options Code | None |
| AC/DC | DC |
| Port Restrictor Plugs | None |
| Response Time | 50 to 80 ms |
| Watt Rating | 30 W |
| Actuation Identification | Solenoid A, Solenoid B |
| Spool Code | 0 |
| Crossover | All Ports Open |
| Fluid Cleanliness | 19/17/14 micron |
| Port T Pressure Rating | 1000 psi |
| Performance | Standard Performance |
| Design No. | 60 |
| Timing Code | None |
| Rated Flow [Max] | 24 gal/min |
| Response Type | Standard Response |
| Electrical Options Code | None |
| Function Code | 0 |
| Operation | Solenoid Operated |
| Solenoid Indicator Lights Code | None |
| Pilot Drain Code | None |
| Indicator Lights | No |
| Spool Spring Arrangement Code | C |
| Reducer Module | N/A |
| Weight | 14.3 LB |
