These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
P Blocked, A & B to T
Coil Type Code
F
Pilot/Drain
None
NFPA Size
D03
EN Code
None
Spool Shift Timing
N/A
Crossover
P Blocked, A or B to T
Housing Code
W
Spool Indicator Switch Code
None
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Function
3-Position Spring Centered
Seal Material
Buna-N
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Operation
Solenoid Operated
Solenoid Code
G
Electrical Connector Code
T
Solenoid Energization Code
None
Spool Spring Arrangement Code
C
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Voltage & Frequency
12 VDC
Electrical Connection
Wired Terminal Block
Surge Suppressor/Damper Code
None
Solenoid
Double
Valve Type
High-Performance
Overrides
No Overrides
Response Type
Standard Response
Mechanical Options
None
Port T Code
7
Coil Rating Code
G
Indicator Lights
Yes
Cycle Rate [Max]
N/A
Manual Override Option Code
None
Reducer Module
N/A
Design No.
60
Actuator Type
Solenoid
Spool Code
66
Port Restrictor Plug Code
None
Pilot Valve Type
N/A
Function Code
66
AC/DC
DC
Solenoid Indicator Lights Code
L
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Electrical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
