These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Electrical Connector Code
T
Spool Spring Arrangement Code
C
Center Position
P Blocked, A & B to T
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Function
3-Position Spring Centered
Overrides
No Overrides
Design No.
60
Crossover
P Blocked, A or B to T
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
66
Coil Type Code
F
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
Solenoid
Double
Port Restrictor Plug Code
None
Electrical Options
None
Pilot/Drain
None
Valve Type
High-Performance
Housing Code
W
Operation
Solenoid Operated
Spool Indicator Switch Code
None
Port T Code
6
EN Code
None
NFPA Size
D03
Spool Code
66
Voltage & Frequency
110/120 VAC – 50/60 Hz
Reducer Module
N/A
Pressure [Max]
5075 psi
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Solenoid Code
B
Electrical Connection
Wired Terminal Block
Indicator Lights
Yes
Surge Suppressor/Damper
None
Port Restrictor Plugs
None
Response Type
Standard Response
Coil Rating Code
B
Seal Material
Buna-N
AC/DC
AC
Solenoid Indicator Lights Code
L
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back