These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Overrides
No Overrides
Indicator Lights
Yes
Valve Type
High-Performance
Surge Suppressor/Damper
None
Electrical Connection
Wired Terminal Block
Pilot Valve Type
N/A
Center Position
P Blocked, A & B to T
Response Type
Standard Response
Coil Rating Code
HL
Port Restrictor Plug Code
None
Port T Code
7
Crossover
P Blocked, A or B to T
Solenoid
Double
Solenoid Indicator Lights Code
L
Surge Suppressor/Damper Code
None
Actuator Type
Solenoid
Coil Type Code
F
Mechanical Options
None
Pressure Port Check Valve Pressure
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
AC/DC
DC
Spool Spring Arrangement Code
C
Housing Code
W
NFPA Size
D03
Function
3-Position Spring Centered
EN Code
None
Pilot/Drain
None
Operation
Solenoid Operated
Reducer Module
N/A
Design No.
60
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
Voltage & Frequency
24 VDC, Low Power Coil
Electrical Connector Code
T
Manual Override Option Code
None
Solenoid Code
HL
Spool Indicator Switch Code
None
Seal Material
Buna-N
Electrical Options
None
Spool Code
6
Function Code
6
Pressure [Max]
5075 psi
Port Restrictor Plugs
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back