02-144268

Vickers D05 Solenoid Valve

Item #102084768

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Coil Rating Code	D
Solenoid	Double
Center Position	P Blocked, A & B to T
Electrical Options Code	L
Mechanical Options	None
Overrides	No Overrides
Spool Spring Arrangement Code	C
Mechanical Options Code	None
Coil Type Code	None
Reducer Module	N/A
Design No.	60
Pilot/Drain	None
Rated Flow [Max]	25 gal/min
Electrical Options	None
Function	3-Position Spring Centered, Double End
Port T Pressure Rating	1000 psi
Coil Type	Flying Leads
Port Restrictor Plugs	None
Model No.	DG4S4L-016C-D-60
Cycle Rate [Max]	N/A
Surge Suppressor/Damper	None
Pilot Valve Type	N/A
Crossover	P Blocked, A or B to T
Spool Code	6
NFPA Size	D05
Pressure Port Check Valve Pressure	N/A
Voltage & Frequency	220 VAC - 50 Hz
Seal Material	Buna-N
Electrical Connection	KU W/ Deutsch Connector
AC/DC	AC
Tank Port Rating	1000
Actuator Type	Solenoid
Flow Direction Code	4
Valve Type	Standard-Duty
Indicator Lights	Yes
Operation	Solenoid Operated
Pressure [Max]	3600 psi
Response Type	Standard Response
Weight	10.0 LB