- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port Restrictor Plugs | None |
| Mechanical Options Code | None |
| Coil Rating Code | D |
| AC/DC | AC |
| Electrical Options | None |
| Coil Type Code | U |
| Solenoid | Double |
| Performance | Standard Performance |
| Response Type | Standard Response |
| Port T Pressure Rating | 1000 psi |
| Pilot/Drain | None |
| Model No. | DG4S4-010C-U-D-60 |
| Valve Type | Standard-Duty |
| Temperature Range [Min] | 68 °F |
| Crossover | All Ports Open |
| Pressure [Max] | 6500 psi |
| Mounting | Subplate/Manifold Mount |
| Body Material | Gray Iron |
| Surge Suppressor/Damper | None |
| Electrical Connection | DIN 43650 |
| NFPA Size | D05 |
| Actuation Identification | Solenoid A, Solenoid B |
| Overrides | No Overrides |
| Actuator Type | Solenoid |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Leakage | Standard Performance |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Electrical Options Code | None |
| Fluid Cleanliness | 19/17/14 micron |
| Function | 3-Position Spring Centered, Double End |
| Response Time | 20 to 40 ms |
| No. of Stages | Single Stage |
| Tank Port Rating | 1000 |
| Seal Material | Buna-N |
| Pilot Valve Type | N/A |
| Flow Direction Code | 4 |
| Rated Flow [Max] | 24 gal/min |
| Reducer Module | N/A |
| Mechanical Options | None |
| Design No. | 60 |
| Center Position | All Ports Open |
| Temperature Range [Max] | 122 °F |
| Cycle Rate [Max] | N/A |
| Compatible Fluids | Petroleum Oil |
| Spool Spring Arrangement Code | C |
| Indicator Lights | No |
| Manual Override | Plain Override |
| Pressure Port Check Valve Pressure | N/A |
| Spool Code | 0 |
| Operation | Solenoid Operated |
| Weight | 10.0 LB |

