These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
None
EN Code
None
Spool Shift Timing
N/A
Design No.
60
Port Restrictor Plug Code
None
AC/DC
DC
Valve Type
High-Performance
Crossover
All Ports Blocked
Function Code
2
Manual Override Option Code
Z
Port T Code
7
Actuator Type
Solenoid
Electrical Connection
DIN 43650
Electrical Options
None
Pilot Valve Type
N/A
Center Position
All Ports Blocked
Mechanical Options
None
Indicator Lights
No
Housing Code
None
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Function
3-Position Detented
Pressure [Max]
5075 psi
Solenoid Code
H
NFPA Size
D03
Overrides
No Overrides
Solenoid Energization Code
None
Rated Flow [Max]
21 gal/min
Coil Type
DIN 43650
Pilot/Drain
None
Electrical Connector Code
None
Port Restrictor Plugs
None
Spool Spring Arrangement Code
N
Voltage & Frequency
24 VDC
Surge Suppressor/Damper
None
Response Type
Standard Response
Coil Rating Code
H
Solenoid
Double
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Spool Code
2
Coil Type Code
U
Seal Material
Buna-N
Reducer Module
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
