Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Connection | KU W/ Deutsch Connector |
| Electrical Options Code | W |
| Valve Type | Standard-Duty |
| Crossover | All Ports Blocked |
| Mechanical Options Code | None |
| Pressure [Max] | 3600 psi |
| Voltage & Frequency | 12 VDC |
| Overrides | No Overrides |
| Solenoid | Single |
| Spool Spring Arrangement Code | A |
| AC/DC | DC |
| Coil Type | Flying Leads |
| Center Position | All Ports Blocked |
| NFPA Size | D05 |
| Tank Port Rating | 1000 |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options | None |
| Rated Flow [Max] | 25 gal/min |
| Operation | Solenoid Operated |
| Port T Pressure Rating | 1000 psi |
| Coil Rating Code | G |
| Port Restrictor Plugs | None |
| Spool Code | 2 |
| Pilot Valve Type | N/A |
| Function | 2-Position Spring Offset |
| Reducer Module | N/A |
| Seal Material | Buna-N |
| Surge Suppressor/Damper | None |
| Cycle Rate [Max] | N/A |
| Flow Direction Code | 4 |
| Mechanical Options | None |
| Pilot/Drain | None |
| Actuator Type | Solenoid |
| Design No. | 60 |
| Indicator Lights | No |
| Coil Type Code | None |
| Response Type | Standard Response |
| Model No. | DG4S4W-012A-G-60 |
| Weight | 10.0 LB |
