02-119874

Vickers D05 Solenoid Valve

Item #101955179

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Actuator Type	Solenoid
Center Position	P & B Blocked, A to T
Model No.	DG4S4-013C-D-60
Response Type	Standard Response
Coil Type Code	None
Coil Rating Code	D
Port Restrictor Plugs	None
Crossover	All Ports Blocked, or P & B Blocked, A to T
Pressure Port Check Valve Pressure	N/A
Cycle Rate [Max]	N/A
Spool Code	3
Tank Port Rating	1000
Reducer Module	N/A
Overrides	No Overrides
Seal Material	Buna-N
Design No.	60
Pilot Valve Type	N/A
Pilot/Drain	None
Voltage & Frequency	220 VAC - 50 Hz
Function	3-Position Spring Centered, Double End
AC/DC	AC
NFPA Size	D05
Valve Type	Standard-Duty
Electrical Connection	KU W/ Deutsch Connector
Mechanical Options	None
Rated Flow [Max]	25 gal/min
Pressure [Max]	3600 psi
Solenoid	Double
Port T Pressure Rating	1000 psi
Indicator Lights	No
Spool Spring Arrangement Code	C
Coil Type	Flying Leads
Operation	Solenoid Operated
Surge Suppressor/Damper	None
Flow Direction Code	4
Electrical Options Code	None
Electrical Options	None
Mechanical Options Code	None
Weight	10.0 LB