
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End To Center Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Design No. | 60 |
Port Restrictor Plugs | None |
Coil Type Code | None |
No. of Stages | Single Stage |
Valve Type | Standard-Duty |
Actuation Identification | Solenoid B |
Flow Direction Code | 4 |
Coil Rating Code | B |
Model No. | DG4S4L-012B-B-60 |
Center Position | All Ports Blocked |
Electrical Options | None |
Surge Suppressor/Damper | None |
Pilot/Drain | None |
Function | 2-Position Spring Centered, End To Center |
Indicator Lights | Yes |
Response Time | 20 to 40 ms |
Port T Pressure Rating | 1000 psi |
Solenoid | Single |
Electrical Connection | Lead Wires w/o Terminal Box |
Overrides | No Overrides |
Leakage | Standard Performance |
Temperature Range [Max] | 122 °F |
Pilot Valve Type | N/A |
Compatible Fluids | Petroleum Oil |
Cycle Rate [Max] | N/A |
Response Type | Standard Response |
Performance | Standard Performance |
NFPA Size | D05 |
Manual Override | Plain Override |
AC/DC | AC |
Temperature Range [Min] | 68 °F |
Reducer Module | N/A |
Tank Port Rating | 1000 |
Operation | Solenoid Operated |
Seal Material | Buna-N |
Coil Type | Flying Leads |
Pressure Port Check Valve Pressure | N/A |
Body Material | Gray Iron |
Crossover | All Ports Blocked |
Spool Spring Arrangement Code | B |
Electrical Options Code | L |
Actuator Type | Solenoid |
Spool Code | 2 |
Fluid Cleanliness | 19/17/14 micron |
Voltage & Frequency | 110/120 VAC - 50/60 Hz |
Mounting | Subplate/Manifold Mount |
Mechanical Options Code | None |
Rated Flow [Max] | 24 gal/min |
Pressure [Max] | 4500 psi |
Mechanical Options | None |
Weight | 10.0 LB |
