Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Crossover | P Blocked, A or B to T |
| Pilot/Drain | None |
| Pilot Valve Type | N/A |
| Solenoid Code | G |
| Valve Type | Standard-Duty |
| Spool Spring Arrangement Code | C |
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| Pressure [Max] | 3600 psi |
| Cycle Rate [Max] | N/A |
| Mechanical Options Code | None |
| Rated Flow | 20 gal/min |
| Voltage & Frequency | 12 VDC |
| Actuator Type | Solenoid |
| Electrical Options | None |
| Tank Port Rating | 1000 |
| Mechanical Options | None |
| Function Code | 6 |
| Function | 3-Position Spring Centered, Double End |
| Electrical Options Code | None |
| Port Restrictor Plugs | None |
| Seal Material | Buna-N |
| Spool Code | 6 |
| Flow Direction Code | 4 |
| Electrical Connection | DIN 43650 |
| Pressure Port Check Valve Pressure | N/A |
| Timing Code | None |
| Design No. | 60 |
| Coil Rating Code | G |
| Operation | Solenoid Operated |
| Spool Shift Timing | N/A |
| Rated Flow [Max] | 25 gal/min |
| AC/DC | DC |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Solenoid Indicator Lights Code | None |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Reducer Module | N/A |
| Pilot Drain Code | None |
| Solenoid | Double |
| Coil Type Code | U |
| Center Position | P Blocked, A & B to T |
| Top Electrical Box | No |
| Model No. | DG4S4-016C-U-G-60 |
| Overrides | No Overrides |
| Weight | 13.55 LB |
