Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port T Pressure Rating | 1000 psi |
| Actuation Identification | Solenoid B |
| Pressure [Max] | 3600 psi |
| Surge Suppressor/Damper | None |
| Seal Material | Buna-N |
| Coil Type Code | None |
| Solenoid | Single |
| Center Position | All Ports Blocked |
| Temperature Range [Min] | 68 °F |
| Port Restrictor Plugs | None |
| Mounting | Subplate/Manifold Mount |
| Crossover | All Ports Blocked |
| Electrical Options | None |
| Temperature Range [Max] | 179.6 °F |
| Rated Flow [Max] | 20 gal/min |
| Watt Rating | 35 W |
| Design No. | 60 |
| NFPA Size | D05 |
| Function | 2-Position Spring Offset |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options Code | None |
| Operation | Solenoid Operated |
| No. of Stages | Single Stage |
| Coil Type | Flying Leads |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Spool Code | 2 |
| Pilot/Drain | None |
| Leakage | Standard Performance |
| Model No. | DG4S4-012A-B-60-LH |
| Coil Rating Code | B |
| Mechanical Options Code | LH |
| Response Type | Standard Response |
| Electrical Connection | KU W/ Deutsch Connector |
| Fluid Cleanliness | 19/17/14 micron |
| Spool Spring Arrangement Code | A |
| Overrides | No Overrides |
| Flow Direction Code | 4 |
| Actuator Type | Solenoid |
| Reducer Module | No |
| Spool Center Condition | B Port End |
| Mechanical Options | Single Solenoid Reverse Assembly |
| Tank Port Rating | 1000 |
| Body Material | Gray Iron |
| Pilot Valve Type | N/A |
| AC/DC | AC |
| Valve Type | Standard-Duty |
| Cycle Rate [Max] | N/A |
| Indicator Lights | No |
| Weight | 1.0 LB |
