- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Leakage | Standard Performance |
| Mounting | Subplate/Manifold Mount |
| Cycle Rate [Max] | N/A |
| Pilot/Drain | None |
| Electrical Options | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Port Restrictor Plugs | None |
| Indicator Lights | No |
| Function | 3-Position Spring Centered, Double End |
| AC/DC | AC |
| Coil Type | Flying Leads |
| Temperature Range [Min] | 68 °F |
| Crossover | All Ports Open, Restricted |
| Electrical Options Code | None |
| Surge Suppressor/Damper | None |
| Rated Flow [Max] | 20 gal/min |
| Seal Material | Buna-N |
| Fluid Cleanliness | 19/17/14 micron |
| Pilot Valve Type | N/A |
| Tank Port Rating | 1000 |
| Solenoid | Double |
| Mechanical Options | None |
| Pressure [Max] | 3600 psi |
| Design No. | 60 |
| Operation | Solenoid Operated |
| Electrical Connection | KU W/ Deutsch Connector |
| Coil Rating Code | G |
| Valve Type | Standard-Duty |
| Spool Spring Arrangement Code | C |
| Response Type | Standard Response |
| Spool Center Condition | A Port and Double Offset sensing switch on B Port |
| Spool Code | 8 |
| Mechanical Options Code | None |
| Body Material | Gray Iron |
| Temperature Range [Max] | 179.6 °F |
| Overrides | No Overrides |
| Actuator Type | Solenoid |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| No. of Stages | Single Stage |
| Center Position | P to T, A & B Blocked |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| Model No. | DG4S4-018C-G-60 |
| Reducer Module | No |
| Watt Rating | 42 W |
| Coil Type Code | None |
| Weight | 10.0 LB |

