These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure Port Check Valve Pressure
N/A
Design No.
60
Coil Type Code
U
EN Code
None
Solenoid Energization Code
None
Function Code
2
Cycle Rate [Max]
N/A
Pilot/Drain
None
Surge Suppressor/Damper Code
None
AC/DC
AC
Function
3-Position Spring Centered
Crossover
All Ports Blocked
Solenoid Indicator Lights Code
None
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Indicator Lights
No
Overrides
No Overrides
Electrical Connection
DIN 43650
Coil Rating Code
A
Operation
Solenoid Operated
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Coil Type
DIN 43650
Reducer Module
N/A
Pressure [Max]
5075 psi
Port T Code
6
Solenoid
Double
Electrical Options
None
Port Restrictor Plug Code
None
Manual Override Option Code
H
Spool Shift Timing
N/A
Electrical Connector Code
None
Seal Material
Buna-N
Surge Suppressor/Damper
None
NFPA Size
D03
Spool Spring Arrangement Code
C
Solenoid Code
A
Voltage & Frequency
110 VAC – 50 Hz
Center Position
All Ports Blocked
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Port T Pressure Rating
3000 psi
Housing Code
None
Response Type
Standard Response
Spool Code
2
Mechanical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
