These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Reducer Module
N/A
Center Position
P Blocked, A & B to T
Coil Type Code
U
Electrical Options
None
Pilot Valve Type
N/A
Solenoid Code
G
Spool Spring Arrangement Code
N
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Overrides
No Overrides
Pressure [Max]
5075 psi
Port Restrictor Plugs
None
Actuator Type
Solenoid
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
Response Type
Standard Response
Port T Code
7
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Coil Rating Code
G
Rated Flow [Max]
21 gal/min
EN Code
None
Electrical Connection
DIN 43650
Pilot/Drain
None
Solenoid
Double
Spool Code
6
Indicator Lights
No
Crossover
P Blocked, A or B to T
Function Code
6
Valve Type
High-Performance
Manual Override Option Code
H
Solenoid Energization Code
None
NFPA Size
D03
Housing Code
None
Coil Type
DIN 43650
AC/DC
DC
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Function
3-Position Detented
Voltage & Frequency
12 VDC
Mechanical Options
None
Design No.
60
Operation
Solenoid Operated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
