Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 2.1 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Splines | 6 |
| Motor Element | Gerotor |
| Mounting Holes | M10 x 1.5 |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Max] | 1021 rpm |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Mount Type | 4 Bolt |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Flow Rate | 38 lpm |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Special Features Hardware Code | 00 |
| Series | T Series |
| Shaft Size & Type | 1 in Splined |
| Mounting Hole Size | 10 mm |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 2.1 |
| RPM [Min] | 1021 rpm |
| Case Drain | None |
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Material | Cast Iron |
| Port Type | Manifold |
| Output Shaft Code | 02 |
| Shaft Type | Splined |
| Special Features | None |
| Pilot Diameter | 1.75 in |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 672 in lb |
| Mounting Type Code | E |
| Paint Code | A |
| Port Code | D |
| Flange Orientation | Standard |
| Weight | 15.0 LB |
