Find a Service Center
Char-Lynn
104-1378-006
2000 Series Low Speed, High Torque (LSHT) Geroler® Disc Motor
Item #100154430
- Disc Motor
- Geroler
- Disc Valve
- Port
- 7.97 Cubic Inch Displacement Per Rev
applications
- Swing motor, Brush Cutters & mowers, Harvesting equipment
features
- Built for high torque and low speed
- Up to 25 hp
- Two-bolt, SAE A mount
- SAE #10 ports
- 1" straight keyed shaft with 1/4" woodruff key
| Port Size | 1/2 |
| Splines | 14 |
| Motor Type | Disc Valve |
| Paint Code | A |
| Accessories Code | 00 |
| Port Type | BSPP |
| Material | Cast Iron |
| Case Drain | G 1/4 (BSP) |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 576 rpm @ 20 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3420 in lb |
| Inlet Pressure [Max] | 4500 psi |
| Port Code | AG |
| Seal Material | Buna-N |
| Flow Rate | 75 lpm |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| RPM [Min] | 576 rpm |
| Output Shaft Code | 04 |
| Special Features Assembly Code | 0 |
| Motor Element | Geroler |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | 1 1/4 in 14T Splined |
| Special Features | None |
| Case Drain Code | 02 |
| Mounting Type Code | AH |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 7.97 |
| Shaft Type | Splined |
| Series | 2000 Series |
| Port Location | Side Port, Staggered |
| Mounting Hole Size | 0.535 in |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| Weight | 42.0 LB |
