Find a Service Center
Char-Lynn
103-3438-012
Char-Lynn S Series Low Speed, High Torque (LSHT) Geroler® Spool Motor
Item #100162632
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Eaton's Low Speed, High Torque (LSHT) Geroler® motors are similar in design to the Geroter motor, but feature better low speed performance characteristics and higher overall efficiency.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Journal bearings for extended life
- High shaft load capability
- Smooth rotation even at low rpm
- Additional configurations available
- please contact your local Applied® service center for more information
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Output Shaft Code | 01 |
| Geroter/Geroler Options Code | 0 |
| Seal Options Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Mount Type | 2 Bolt, SAE-A |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain | None |
| Displacement (in³/rev) | 10.07 |
| Flange Orientation | Standard |
| Pressure [Max] | 1900 psi |
| Port Code | AB |
| Port Type | NPTF |
| Shaft Options Code | 0 |
| Port Location | Side Port |
| Bolt Circle Dia. | 4.19 in |
| Speed Sensor Options Code | 0 |
| Paint Code | Y |
| Mounting Type Code | AA |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 0.535 in |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 343 rpm |
| Flow Rate | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Series | S Series |
| Port Size | 1/2-14 |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Paint/Packaging | Nickel Plated, Individual Box |
| Manifold Options Code | 0 |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Weight | 29.0 LB |
