Find a Service Center
Char-Lynn
103-3389-012
Char-Lynn S Series Low Speed, High Torque (LSHT) Geroler® Spool Motor
Item #100160366
- Spool Motor
- Geroler
- Spool Valve
- 1/2-14 NPTF Port
- 5.67 Cubic Inch Displacement Per Rev
description
- Eaton's Low Speed, High Torque (LSHT) Geroler® motors are similar in design to the Geroter motor, but feature better low speed performance characteristics and higher overall efficiency.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Journal bearings for extended life
- High shaft load capability
- Smooth rotation even at low rpm
- Additional configurations available
- please contact your local Applied® service center for more information
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| RPM [Max] | 607 rpm |
| Speed Sensor Options Code | 0 |
| Series | S Series |
| Motor Type | Spool Valve |
| Port Size & Location | 1/2 in NPTF Side |
| Port Code | AB |
| Seal Material | Viton |
| Pressure [Max] | 2000 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Mount Type | 4 Bolt, 1.75 in Pilot |
| Manifold Options Code | 0 |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Geroter/Geroler Options Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Paint Code | Y |
| Output Torque at Rated PSI (inch/pounds) | 1623 in lb |
| Pilot Diameter | 1.75 in |
| Motor Element | Geroler |
| RPM [Min] | 93 rpm |
| Displacement (in³/rev) | 5.67 |
| Material | Cast Iron |
| Flow Rate | 14 gal/min |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Paint/Packaging | Nickel Plated Motor, Individual Box |
| Flange Orientation | Standard |
| Shaft Options Code | 0 |
| Mounting Type Code | BA |
| Port Type | NPTF |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 3/8 in |
| Port Size | 1/2-14 |
| Maximum Speed @ Continuous Flow | 607 rpm @ 15 gal/min |
| Seal Options Code | 03 |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | None |
| Weight | 11.7 LB |
