Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 10.07 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Output Shaft Code | 01 |
| Port Size | 1/2-14 |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Paint Code | A |
| Series | S Series |
| Flow [Max] | 15 gal/min |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | BA |
| RPM [Max] | 343 rpm |
| Geroter/Geroler Options Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2662 in lb |
| Manifold Options Code | 0 |
| Speed Sensor Options Code | E |
| Port Type | NPTF |
| Pressure [Max] | 1900 psi |
| Port Code | AB |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Min] | 343 rpm |
| Port Location | Side Port |
| Case Drain | None |
| Flange Orientation | Standard |
| Shaft Options Code | 0 |
| Pilot Diameter | 1.75 in |
| Shaft Type | Straight w/ Woodruff Key |
| Seal Options Code | 00 |
| Mount Type | 4 Bolt |
| Displacement (in³/rev) | 10.07 |
| Flow Rate | 57 lpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Case Drain Code | 0 |
| Weight | 0.0 LB |
