Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| RPM [Min] | 153 rpm |
| Port Size & Location | SAE-10 Side |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 4672 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Flow Rate | 15 gal/min |
| Mounting Type Code | REF! |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.6 |
| Flow [Max] | 15 gal/min |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Code | A |
| Mounting Holes | 0.535 in |
| Series | S Series |
| RPM [Max] | 153 rpm |
| Splines | 0 |
| Mount Type | 2 Bolt |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features | None |
| Bolt Circle Dia. | 4.19 in |
| Maximum Speed @ Continuous Flow | 153 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Pressure [Max] | 1300 psi |
| Case Drain Code | 1 |
| Weight | 1.0 LB |
