Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 371 rpm |
| Maximum Speed @ Continuous Flow | 153 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Straight w/ Woodruff Key |
| Port Type | NPTF |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Special Features | None |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.6 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 4672 in lb |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Pressure [Max] | 1300 psi |
| Pilot Diameter | 3.25 in |
| Flow Rate | 15 gal/min |
| Case Drain Code | 1 |
| Port Code | B |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.535 in |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Series | S Series |
| Seal Material | Buna-N |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Type Code | REF! |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Port Size | 1/2, 1/2-14 |
| RPM [Max] | 153 rpm |
| Special Features Assembly Code | 0 |
| Weight | 20.642 LB |
