Find a Service Center
- Spool Motor
- Geroler
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 22.64 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Increased shaft seal
- Compact yet powerful
- Extended bearing life
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Series | S Series |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | Manifold |
| Motor Type | Spool Valve |
| RPM [Max] | 153 rpm |
| Mounting Type Code | REF! |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 153 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Seal Material | Buna-N |
| Splines | 6 |
| RPM [Min] | 153 rpm |
| Material | Cast Iron |
| Paint Code | A |
| Displacement (in³/rev) | 22.64 |
| Corrosion Resistant | No |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Case Drain | None |
| Pressure [Max] | 1300 psi |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Output Shaft Code | 02 |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Min] | 600 psi |
| Mounting Hole Size | 0.565 in |
| Port Code | C |
| Motor Element | Geroler |
| Output Torque at Rated PSI (inch/pounds) | 4673 in lb |
| Flow Rate | 14 gal/min |
| Special Features Hardware Code | AB |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Shaft Type | Splined |
| Special Features | Low Speed Valve |
| Flange Orientation | Standard |
| Weight | 29.0 LB |
