Find a Service Center
- Spool Motor
- Geroler
- Spool Valve
- G 1/2 BSPP Port
- 18.24 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.187 in |
| Output Shaft Code | 24 |
| Port Size | 1/2, G 1/2 |
| RPM [Max] | 190 rpm |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | Straight |
| Port Type | BSPP |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Mounting Hole Size | 0.565 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 4345 in lb |
| Port Code | E |
| Rotation | Standard Rotation |
| Mounting Type Code | REF! |
| Series | S Series |
| Displacement (in³/rev) | 18.24 |
| Special Features | None |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 190 rpm @ 15 gal/min |
| RPM [Min] | 299 rpm |
| Pressure [Max] | 1500 psi |
| Case Drain Code | 2 |
| Flow Rate | 14 gal/min |
| Motor Element | Geroler |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Shaft Type | Straight |
| Corrosion Resistant | No |
| Weight | 29.0 LB |
