Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Case Drain Code | 2 |
| Port Location | Side Port |
| Series | S Series |
| Mounting Type Code | REF! |
| Shaft Size & Type | Straight |
| Special Features | None |
| Motor Type | Spool Valve |
| Port Type | BSPP |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 2662 in lb |
| Flange Orientation | Standard |
| Shaft Type | Straight |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 1/2, G 1/2 |
| Pressure [Max] | 1900 psi |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 10.07 |
| Flow Rate | 15 gal/min |
| Motor Element | Gerotor |
| Port Code | E |
| Corrosion Resistant | No |
| RPM [Max] | 343 rpm |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Paint Code | A |
| Output Shaft Code | 24 |
| Weight | 29.0 LB |
