Find a Service Center
- Spool Motor
- Geroler
- Spool Valve
- 1/2-14 NPTF Port
- 4.64 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| RPM [Min] | 792 rpm |
| Port Type | NPTF |
| Port Size | 1/2, 1/2-14 |
| Case Drain | None |
| Pressure [Max] | 2000 psi |
| Series | S Series |
| Mount Type | 2 Bolt |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| Port Location | Side Port |
| Special Features | Low Speed Valve |
| Special Features Hardware Code | AB |
| Displacement (in³/rev) | 4.64 |
| Paint Code | A |
| Flow Rate | 57 lpm |
| Mounting Type Code | REF! |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.565 in |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black |
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| RPM [Max] | 792 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Geroler |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Port Code | B |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Pressure [Min] | 600 psi |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.187 in |
| Splines | 0 |
| Flange Orientation | Standard |
| Weight | 29.0 LB |
