Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 13.7 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| RPM [Min] | 224 rpm |
| Mounting Hole Size | 0.535 in |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 13.7 |
| Output Torque at Rated PSI (inch/pounds) | 3290 in lb |
| Output Shaft Code | 02 |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Shaft Type | Splined |
| Special Features | None |
| Case Drain | None |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1700 psi |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 253 rpm @ 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Splines | 6 |
| Port Size & Location | SAE-10 Side |
| Paint Code | A |
| Port Size | SAE-10, 7/8-14 UNF |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Flow Rate | 15 gal/min |
| Mounting Type Code | REF! |
| Shaft Size & Type | 1 in - 6T Spline |
| Series | S Series |
| Port Type | SAE O-Ring |
| RPM [Max] | 253 rpm |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Port Code | A |
| Bolt Circle Dia. | 4.19 in |
| Duty | Standard-Duty |
| Weight | 29.0 LB |
